Building Permits
To date, we have no information about building permits in 2025
Apr 28, 2016
Description: Original permit description:(com2015-17279) removing 3 existing antennas and replacing with 3 new antennas, adding related ancillary equipment as per plans as per code. if installing suppression system in equipment cabinet then a separate permit is required.
- Permit #: COM2016-10954
Dec 30, 2015
Description: Remove three antennas and install six antennas, three rrus and one hybrid cable to an existing self-support tower, as per plans as per code. if installing suppression system in equipment cabinet then separate permit is required.
- Permit #: COM2015-28891
Sep 14, 2015
Description: Removing 3 existing antennas and replacing with 3 new antennas, adding related ancillary equipment as per plans as per code. if installing suppression system in equipment cabinet then a separate permit is required.
- Permit #: COM2015-17279
Feb 21, 2013
Description: Original permit description:(com2012-10012) exterior work-remove and replace existing antennas on existing sturcture. antenna will be located at same rad center as existing. add (1) support equipment cabinet at excisting location as per plans as per code.
- Permit #: COM2013-03340
Nov 9, 2012
Description: Improve existing industrial steel siding building with new steel siding. keeping the same footprint but raising the roof on part of the building (building size is approximately 50 x 600) as per plans and as per code.
- Permit #: COM2012-19435
May 22, 2012
Description: Exterior work-remove and replace existing antennas on existing sturcture. antenna will be located at same rad center as existing. add (1) support equipment cabinet at excisting location as per plans as per code.
- Permit #: COM2012-10012
Feb 28, 2012
Description: Add 1 circuit, upgrade 1 cabinet, on steel beams on grade. remove /replace 3 antennas on tower. remove 3 antennas on tower as per plans as per code. if installing suppression system in equipment cabinet then a separate permit is required.
- Permit #: COM2012-01683
Nov 8, 2011
Description: Amend permit#com2010-19110, issued on 9/2/10 with plans32010-1164 to add contractors as listed above and original permit description:(com2010-19110) 2 dish antennas on existing tower with required equipment as per code and plans.
- Permit #: COM2011-24444
Aug 2, 2011
Description: Original permit description:(com2010-20315) addition of three antennas on existing communications structure . no change in height as per plans as per code. if installing supressions system in equipment cabinet(s) then a separate permit is required.
- Permit #: COM2011-16713
Nov 3, 2010
Description: Addition of three antennas on existing communications structure . no change in height as per plans as per code. if installing supressions system in equipment cabinet(s) then a separate permit is required.
- Permit #: COM2010-20315
Sep 22, 2010
Description: 2 dish antennas on existing tower with required equipment as per code and plans.
- Permit #: COM2010-19110
Mar 30, 2010
Description: Upgrade existing 200 amp service to 400 amp & 2 ckts as per code
- Permit #: COM2010-04229
Jan 19, 2010
Description: Request for time extension on permit com2009-13047, issued on 07/17/09 with original completion date of 01/17/10. original permit description:(com2009-13047) addition of 2 antennas on existing communication structure. no change in height. if installing suppression system in equipment cabinets then a separate permit will be required. clear wireless, llc atc 305202.
- Permit #: COM2010-01019
Jul 17, 2009
Description: Addition of 2 antennas on existing communication structure. no change in height. if installing suppression system in equipment cabinets then a separate permit will be required. clear wireless, llc atc 305202.
- Permit #: COM2009-13047
Mar 23, 2009
Description: Original permit description:(com2008-12216) addition of antennae on existing telecommunication structure (no height increase) addition of equipment cabinet and pad / platform, and addition of meter box as per plans ans as per code.
- Permit #: COM2009-06532
Nov 21, 2008
Description: Install 200amp underground service to feed 40amp equipment cable as per code
- Permit #: COM2008-31159
Aug 29, 2008
Description: Addition of antennae on existing telecommunication structure (no height increase) addition of equipment cabinet and pad / platform, and addition of meter box as per plans ans as per code.
- Permit #: COM2008-12216
Mar 25, 2008
Description: (use) use portionof premises for freight terminal w/ accessory office(s).
- Permit #: USE2008-01123
Mar 25, 2008
Description: (use) use premises as materials recovery facility.
- Permit #: USE2008-01124
Nov 27, 2007
Description: Swapping antennas and adding cables on (9) antennas, one antenna per sector will stay the same as per plans and code.
- Permit #: COM2007-25268
1030 Edison Hwy Fire Incident History
To date, we have no information about fire incidents in 2025
02 Mar 2016
Off-road vehicle or heavy equipment fire
Property Use —
Outside or special property, other
22 Mar 2011
Building fires
Property Use —
Warehouse
Area of Origin —
Processing/manufacturing area, workroom
15 Jun 1999
Fire in portable building, fixed location
Property Use —
Outside or special property, other
Area of Origin —
Technical processing areas, other
First Ignition —
Magazine, newspaper, writing paper
Edison Hwy Fire Incident History
To date, we have no information about fire incidents in 2025
25 Nov 2018
Building fires
Property Use —
1 or 2 family dwelling
Area of Origin —
Laundry area, wash house (laundry)
First Ignition —
Wearing apparel not on a person
Heat Source —
Radiated, conducted heat from operating equipment
02 May 2017
Building fires
Property Use —
1 or 2 family dwelling
Area of Origin —
Storage area, other
First Ignition —
Floor covering or rug/carpet/mat
02 Mar 2016
Off-road vehicle or heavy equipment fire
Property Use —
Outside or special property, other
05 Aug 2014
Passenger vehicle fire
Property Use —
Vehicle storage, other
1030 Edison Hwy incidents registered in FEMA
(Federal Emergency Management Agency)
To date, we have no information about incidents registered in FEMA in 2025
05 May 2010
Chemical spill or leak
Property Use —
Manufacturing, processing
Edison Hwy Incidents registered in FEMA
(Federal Emergency Management Agency)
To date, we have no information about incidents registered in FEMA in 2025
17 Jun 2015
Gas leak (natural gas or LPG)
Property Use —
1 or 2 family dwelling
17 Mar 2015
Carbon monoxide incident
Property Use —
Preschool
02 Dec 2014
Oil or other combustible liquid spill
Property Use —
1 or 2 family dwelling
21 Aug 2014
Gas leak (natural gas or LPG)
Property Use —
Street or road in commercial area
Properties Nearby
| Street Address | Residens/Landlords |
|---|