113 Lindsley Park Dr Nashville, TN 37206 / 2810

Description: To construct 494sf addition to the rear of existing residence. must comply with hc201400329. 5' min. side setbacks 20' min. rear setback not to be over any easements. pursuant # 2006-1263 metro code of laws i (holder of permit) hereby certify that all construction & demolition waste generated by any & all activities governed by this permit shall be disposed of in an approved landfill. further i certify that no construction & demolition waste shall be stored on the property in violation of any provision of metro code.

Description: To construct 494sf addition to the rear of existing residence. must comply with hc201400329. 5' min. side setbacks 20' min. rear setback not to be over any easements. pursuant # 2006-1263 metro code of laws i (holder of permit) hereby certify that all construction & demolition waste generated by any & all activities governed by this permit shall be disposed of in an approved landfill. further i certify that no construction & demolition waste shall be stored on the property in violation of any provision of metro code.

Description: To construct 494sf addition to the rear of existing residence. must comply with hc201400329. 5' min. side setbacks, 20' min. rear setback, not to be over any easements. pursuant # 2006-1263 metro code of laws, i (holder of permit) hereby certify that all construction & demolition waste generated by any & all activities governed by this permit shall be disposed of in an approved landfill. further, i certify that no construction & demolition waste shall be stored on the property in violation of any provision of metro code.

Description: We will be adding a 500 square foot addition to the rear of the residence. the addition will be in the shadow of the current structure. it will be used for an office and a playroom. roof line to follow existing. mhzc must review application. remains single family residence. pursuant to ordinance no. 2006-1263 of the metropolitan code of laws i (the holder on this permit) hereby certify that all construction and demolition waste generated by any and all activities governed by this permit shall be disposed of in an approved landfill. further i certify that no construction and demolition waste shall be stored on the property in violation of any provision of the metropolitan code.

Description: | description| - construct rear addition| roofing| - roofing material shall be asphalt composite shingles. color shall match existing or if not it shall be approved by the mhzc prior to purchase. | - gutters shall be simple metal gutters. | windows & doors| - windows shall have single-light or fully-simulated divided-light sashes. muntins are to be factory installed with an exterior muntin interior muntin and a spacer within the double-paned glass. window manufacturer and type must be approved by mhzc staff prior to installation. double and triple windows shall have a 4" to 6" mullion between. | - door manufacturer and type must be approved by mhzc staff prior to installation. | - four (4) inch (nominal) wood casings are required around doors windows and vents within clapboard walls. | - windows on clapboard structures shall not have brick-mold. | siding & trim| - siding and trim shall be wood or smooth-faced cement-fiberboard (e.g.: hardiplank). if siding exposure is not matched to that of the existing house then it shall have a maximum reveal of five (5) inches. | - 4 inches (nominal) wood corner-boards are required at the face of each exposed corner. | hvac | - hvac/mechanical/utility vents pipes lines and all associated components condensers or boxes shall be located behind the midpoint of the structure on a non-street facade. | general specifications| - alterations to be constructed in accordance with attached elevations. any deviation from the approved plans could result in changes being reversed to reflect the approved drawings. please note: mhzc staff may have added notes to the submitted drawings. | - all measurements and relationships of existing conditions and new construction shall be field checked for accuracy with approved plans at the responsibility of the applicant. inaccuracies or differences should be reported to mhzc staff prior to continuing with the project. | - any substitutions or deviation from the approved work requires further review and approval by the mhzc prior to work being undertaken. | - the work items listed are approved in accordance with the adopted design guidelines and are not applicable beyond the unique facts and circumstances of this particular application. | - this permit becomes invalid twelve months after issue date. expired permits must be reissued prior to work being undertaken. | - removal of cladding windows and roofing on the existing building all-together is partial-demolition and must be reviewed by the mhzc prior to work taking place. | |approval of design should not be considered approval of a particular use. - this is not a building permit. no work can begin without the appropriate review and approval by the metropolitan department of codes administration: howard school building campus (615) 862-6500. |.

Description: We will be adding a 500 square foot addition to the rear of the residence. the addition will be in the shadow of the current structure. it will be used for an office and a playroom. roof line to follow existing. mhzc must review application. remains single family residence. pursuant to ordinance no. 2006-1263 of the metropolitan code of laws, i (the holder on this permit) hereby certify that all construction and demolition waste generated by any and all activities governed by this permit shall be disposed of in an approved landfill. further, i certify that no construction and demolition waste shall be stored on the property in violation of any provision of the metropolitan code.

Description: Description - construct rear addition roofing - roofing material shall be asphalt composite shingles. color shall match existing or if not, it shall be approved by the mhzc prior to purchase. - gutters shall be simple metal gutters. windows & doors - windows shall have single-light or fully-simulated, divided-light sashes. muntins are to be factory installed with an exterior muntin, interior muntin, and a spacer within the double-paned glass. window manufacturer and type must be approved by mhzc staff prior to installation. double and triple windows shall have a 4" to 6" mullion between. - door manufacturer and type must be approved by mhzc staff prior to installation. - four (4) inch (nominal) wood casings are required around doors, windows, and vents within clapboard walls. - windows on clapboard structures shall not have brick-mold. siding & trim - siding and trim shall be wood or smooth-faced, cement-fiberboard (e.g.: hardiplank). if siding exposure is not matched to that of the existing house, then it shall have a maximum reveal of five (5) inches. - 4 inches (nominal) wood corner-boards are required at the face of each exposed corner. hvac - hvac/mechanical/utility vents, pipes, lines, and all associated components, condensers or boxes shall be located behind the midpoint of the structure on a non-street facade. general specifications - alterations to be constructed in accordance with attached elevations. any deviation from the approved plans could result in changes being reversed to reflect the approved drawings. please note: mhzc staff may have added notes to the submitted drawings. - all measurements and relationships of existing conditions and new construction shall be field checked for accuracy with approved plans at the responsibility of the applicant. inaccuracies or differences should be reported to mhzc staff prior to continuing with the project.

Description: To construct a new one story 28 x 30 addition attached to rear of res.and some renovations to existing house.no new 2nd kitchen. side setbacks min 5'. rear min 20' see plan. hzc-2012-00150. . pursuant ordinance # 2006-1263 metropolitan code of laws i (the holder on this permit) hereby certify that all construction & demolition waste generated by any & all activities governed by this permit shall be disposed of in an approved landfill. further i certify that no construction & demolition waste shall be stored on the property in violation of any provision of metropolitan code.

Description: 7/26/12-home owner changed mind about gas hwh - installing electric. to construct a new one story 28 x 30 addition attached to rear of res.and some renovations to existing house.no new 2nd kitchen. side setbacks min 5'. rear min 20' see plan. hzc-2012-00150. . pursuant ordinance # 2006-1263 metropolitan code of laws i (the holder on this permit) hereby certify that all construction & demolition waste generated by any & all activities governed by this permit shall be disposed of in an approved landfill. further i certify that no construction & demolition waste shall be stored on the property in violation of any provision of metropolitan code.

Description: To construct a new one story 28 x 30 addition attached to rear of res.and some renovations to existing house.no new 2nd kitchen. side setbacks min 5'. rear min 20' see plan. hzc-2012-00150. . pursuant ordinance # 2006-1263 metropolitan code of laws i (the holder on this permit) hereby certify that all construction & demolition waste generated by any & all activities governed by this permit shall be disposed of in an approved landfill. further i certify that no construction & demolition waste shall be stored on the property in violation of any provision of metropolitan code.

Description: | description - construct rear addition.| | foundation| - foundation walls shall be inset from the existing structure by 12" as noted on the floor plan. | - exterior foundation material shall be stuccoed to exactly match the existing structure or be constructed of split-face block. | - foundation height shall match the existing house. | structure | - primary eave height shall match the eave of the existing house. | - primary ridge height shall match the ridge of the existing house. | roofing| - roofing material shall be asphalt composite shingles. | - gutters shall be simple metal gutters. | windows & doors| - windows shall be wood aluminum-clad or fiberglass with single-light or fully-simulated divided-light sashes. muntins are to be factory installed with an exterior muntin interior muntin and a spacer within the double-paned glass. window manufacturer and type must be approved by mhzc staff prior to installation. | - four (4) inch (nominal) wood casings are required around doors windows and vents within clapboard walls. | - windows on clapboard structures shall not have brick-mold. | siding & trim| - siding and trim shall be wood or smooth-faced cement-fiberboard (e.g.: hardiplank). if siding exposure is not matched to that of the existing house then it shall have a maximum reveal of five (5) inches. | - 4 inches (nominal) wood corner-boards are required at the face of each exposed corner. | hvac | - hvac/mechanical/utility vents pipes lines and all associated components condensers or boxes shall be located behind the midpoint of the structure on a non-street facade. | general specifications| - alterations to be constructed in accordance with attached elevations. any deviation from the approved plans could result in changes being reversed to reflect the approved drawings. please note: mhzc staff may have added notes to the submitted drawings. | - all measurements and relationships of existing conditions and new construction shall be field checked for accuracy with approved plans at the responsibility of the applicant. inaccuracies or differences should be reported to mhzc staff prior to continuing with the project. | - any substitutions or deviation from the approved work requires further review and approval by the mhzc prior to work being undertaken. | - the work items listed are approved in accordance with the adopted design guidelines and are not applicable beyond the unique facts and circumstances of this particular application. | - this permit becomes invalid twelve months after issue date. expired permits must be reissued prior to work being undertaken. | | - this is not a building permit. no work can begin without the appropriate review and approval by the metropolitan department of codes administration: howard school building campus (615) 862-6500. |.

Description: Description - construct rear addition. foundation - foundation walls shall be inset from the existing structure by 12" as noted on the floor plan. - exterior foundation material shall be stuccoed to exactly match the existing structure or be constructed of split-face block. - foundation height shall match the existing house. structure - primary eave height shall match the eave of the existing house. - primary ridge height shall match the ridge of the existing house. roofing - roofing material shall be asphalt composite shingles. - gutters shall be simple metal gutters. windows & doors - windows shall be wood, aluminum-clad, or fiberglass with single-light or fully-simulated, divided-light sashes. muntins are to be factory installed with an exterior muntin, interior muntin, and a spacer within the double-paned glass. window manufacturer and type must be approved by mhzc staff prior to installation. - four (4) inch (nominal) wood casings are required around doors, windows, and vents within clapboard walls. - windows on clapboard structures shall not have brick-mold. siding & trim - siding and trim shall be wood or smooth-faced, cement-fiberboard (e.g.: hardiplank). if siding exposure is not matched to that of the existing house, then it shall have a maximum reveal of five (5) inches. - 4 inches (nominal) wood corner-boards are required at the face of each exposed corner. hvac - hvac/mechanical/utility vents, pipes, lines, and all associated components, condensers or boxes shall be located behind the midpoint of the structure on a non-street facade. general specifications - alterations to be constructed in accordance with attached elevations. any deviation from the approved plans could result in changes being reversed to reflect the approved drawings. please note: mhzc staff may have added notes to the submitted drawings. - all measurements